National service hotline: 400 000 6191
Thank you for your continued support of Lumansch Lighting, ,
In order to provide you with the best service, ,
We have a professional Service team, ,
We will have direct communication and contact with you,
Any technical issues you may have can be addressed through the Service department
Obtain detailed information and support,
Our company's professional after-sales personnel will continue to provide you with relevant
Product technical information and practical service support.
SAFE OPERATION
The cleaning and maintenance of large crystal CEILING LAMP often require great attention to the safety of workers, work platforms, and lighting fixtures during high-altitude operations. Generally, it only needs to be cleaned once or twice a year to maintain a beautiful and charming effect.
BULB REPLACEMENT
During the cleaning process, if replacing a light bulb, it is recommended to choose a high-quality and long-lived brand named Product to avoid the occurrence of" East does not shine West; Fang Liang; The problem affects aesthetics.
BEAD DUST REMOVAL
If conditions permit, previously low-end crystal beads were chosen, it is possible to consider hanging high-quality high-end x high-quality high-quality high-end crystal beads with dust-proof treatment on the surface, which is not easy to get dirty and has a good effect. Usually, it is important to pay attention to avoiding the damage of oil fumes to crystal lighting in order to maintain the long-term crystal clarity of the crystal ball or crystal chip.
REFURBISHMENT OF LAMP HOLDER
Truly electroplated lamp holders can generally maintain their color for three to five years or longer without fading; Consider renovating it in three years to give it a brand new feel.
REGULAR INSPECTION
The safety and stability of lighting fixtures suspended in important positions or places with high traffic should be the top priority. Headlamps often weigh several hundred kilograms, in case they fall; The consequences of falling are unimaginable. Therefore, regular personnel inspections should be sent&# 39; Check the embedded parts, load-bearing hooks, and chains hidden in the ceiling to prevent aging without being noticed and causing accidents.
TIMELY UPDATES
If possible, it should be checked simultaneously; Check if the performance of the built-in wires is intact. If any sticking or aging is found, replace them immediately to ensure safety.
PROFESSIONAL MAINTENANCE
Large lighting fixtures with complex wiring (with graded lighting), it is best to hire a lighting company; Company's specialty; Industrial and technical personnel carry out cleaning and maintenance, which is inexpensive, easy to repair, and safe and reliable.
KEROSENE CLEANING
Due to the different quality of crystal lamps, some lamps only need to use an anti-static dry cloth to wipe off the dust on the surface of the lamp decoration. To avoid leaving fingerprints during wiping, it is best to wear white cotton gloves. If it cannot be directly wiped, remove the crystal lamp and soak it in kerosene. Gently wipe the surface with a toothbrush, wait for the surface dirt to soften, and then wash it with laundry detergent.
SPECIAL CLEANING AGENT
Spray SPECIAL CLEANING AGENT on the surface of crystal lighting, and the floating dust of crystal balls or crystal chips will be carried away with the evaporation of the liquid, which is both simple, effective, and easy and fast.
WIPING OF BRACKET ACCESSORIES
Use a soft cloth to wipe, do not touch water or alcohol, to avoid damaging the protective film outside the electroplating layer and affecting the surface gloss effect of the lamp holder.
REPLACE ACCESSORIES
If any defects are found on the bead string, they should be promptly repaired. Rust and discoloration of the connecting buckle of the bead can cause brittle cracking, and it is also necessary to replace it in a timely manner.